#8-6 Technical Spec’s

Specifications

#8-6 RIGHT HAND ROTATION LEFT HAND ROTATION
Reduction/Overdrive Ratio: 1:1 1:1
1.31:1 1.30:1
1.56:1 1.58:1
Unit Weight 300 lbs 300 lbs
Steering Angle 40 Degrees 40 Degrees
Trim Angle 17 Degrees 17 Degrees
Maximum Input Torque 1500 lbs 1500 lbs

 

#8-6 Description

  • Aluminum drop center (#8-6): 1 each aluminum thrust assembly (gear or chain drive)

All Models:

  • 1 each steering cylinder with external hoses and fittings
  • 1 each trim cylinder with external hoses and fittings

 

#8-6 Accessories

All Models:

  • Electrolysis Kit
  • 1 Mechanical Tie Bar Assembly
  • Mechanical trim indicator kit with gauge
  • Hydraulic steering system, single cylinder, single pump:
  • 1 each power steering pump (to be mounted on engine)
  • 1 each helm unit
  • 1 each oil cooler
  • 1 each oil reservoir (1 pint) with filter
  • Parts to be specified as per individual order:
  • 1 Gearbox adapter
  • 1 Driveline
  • 1 Companion flange
  • 1 Propeller
What Arneson Industries Can Do For You
Reliability, Very few moving parts means very few things go wrong.
Efficiency, Very low parasitic drag means more of your engines HP going to the water.
Speed, Low drag design means the boat is getting maximum efforts of your engine horse power.
Fuel Mileage, With a 30% speed increase, you can go 30% faster at the same engine rpm which translates into better fuel mileage for your boat.
Lower Maintenance, With fewer moving parts than conventional propulsion systems, typical maintenance is down to 200 hour oil changes and electrolysis anode replacements.