Specifications

GEAR CHAIN IN-LINE
Reduction Ratio 0.98:1 1.00:1 1.00:1
1.32:1 1.31:1
1.56:1 1.58:1
Unit Weight Bronze: 230 lbs 134 lbs
Aluminum: 157 lbs
Overall Length 39 in 36 in
Nominal Shaft Diameter 1.75 in 1.75 in
Steering Angle Degree 40 degrees 40 degrees
Trim Angle Degree 15 degrees 15 degrees
Maximum Input Torque 650 ft-lbs 650 ft-lbs 650 ft-lbs
650 ft-lbs 650 ft-lbs
650 ft-lbs 650 ft-lbs

 

#6 Description

  • Aluminum in-line (AI06A1S): 1 each aluminum thrust assembly
  • Aluminum drop center (AI06A2/3): 1 each aluminum thrust assembly (gear or chain drive)
  • Bronze drop center (AI06B2/3): 1 each bronze thrust assembly (gear or chain drive)

 

All Models:

  • 1 each steering cylinder with external hoses and fittings
  • 1 each trim cylinder with external hoses and fittings
  • 1 each installation manual, owners manual and drive ball wrench (one per ship set)

 

#6 Accessories

  • Electrolysis Kit
  • Mechanical trim indicator kit with gauge
  • Hydraulic steering system, single cylinder, single pump:
  • 1 each power steering pump (to be mounted on engine)
  • 1 each helm unit
  • 1 each oil cooler
  • 1 each oil reservoir (1 pint) with filter
  • Parts to be specified as per individual order:
  • 1 Gearbox adapter
  • 1 Driveline
  • 1 Companion flange
  • 1 Propeller

 

What Arneson Industries Can Do For You
Reliability, Very few moving parts means very few things go wrong.
Efficiency, Very low parasitic drag means more of your engines HP going to the water.
Speed, Low drag design means the boat is getting maximum efforts of your engine horse power.
Fuel Mileage, With a 30% speed increase, you can go 30% faster at the same engine rpm which translates into better fuel mileage for your boat.
Lower Maintenance, With fewer moving parts than conventional propulsion systems, typical maintenance is down to 200 hour oil changes and electrolysis anode replacements.